Controlled Rotating Cleaners

Jet Tank Washer Turbo SSB 40/75/125

Tank cleaning size: up to 10 m (33 ft)
Operating Pressure: 2 to 10 bar (29 to 145 psi)
Flow rate: 2.1 to 24.5 m³/h
(38 to 409 l/min;)
(10.1 to 107.9 USgpm)
Spray pattern: 360°

The jet cleaner Turbo SSB 40 takes the popular slotted spray ball format into its next evolutionary phase by removing the ball bearings and slowing the rotation speed down.

Jet Tank Washer Turbo SSB 40/75/125

The rotating jet cleaner Turbo SSB 40 & 125 take the popular slotted spray ball format into its next evolutionary phase by removing the ball bearings and slowing the rotation speed down. The tank washer Turbo SSB 75 is designed for tank inside cleaning and stationary installation. This unit has been designed for operation in the vertical position with the inlet connection at the top. Operation in any other position may adversely affect the unit’s performance.

Advantages

  • Slow, Constant Rotation
  • Ball Bearing Free- Increased Service Life
  • High Efficiency Fan Jets
  • FDA conform
  • Economic Flow Rates (SSB 40,75)
  • SIP through the nozzle possible (SSB 125)
  • Preferred mounting position:
    vertical down (SSB 40, 125) 

Operation

Wash fluid is directed through the slots on the rotating ball, producing independent strong fan jets giving total coverage. Each fan jet targets a specific area of the vessel. Ideal for burst rinsing or prolonged washing with instant, strong impact performance.

Applications

Ideally suited to low flow, low pressure applications where a slow constant rotation speed is required to give longer chemical dwell times for improved cleaning efficiency. The tried and tested design makes the units truly versatile across any industry sector. The units are suitable for cleaning small/medium size vessels and manufacturing equipment. Compact in design, effective in performance, they meet all hygienic design requirements, which makes them highly suitable for the pharmaceutical, and biotech industries as well as food, beverage and other hygiene conscious industries.

Technical Data
 Turbo SSB 40Turbo SSB 75Turbo SSB 125
Recommended pressure 2 – 5 bar
(29 - 72.5 psi)
2 - 10 bar
(29 - 145 psi)
2 – 6 bar
(29 - 87 psi)
Cleaning diameter up to 3 m
(9.8 ft)
max. 4.7 m
(15.4 ft)
max. 10 m
(32.8 ft)
Flow rate 2.1 – 3.7 m³/h
38.3 - 61.7 l/min
10.1 - 16.3 USgpm
3.6 - 9.2 m³/h 
60 - 153.3 l/min 
15.85 - 40.5 USgpm
12.0 – 24.5 m³/h
200 - 408.3 l/min 52.8 - 107.9 USgpm)
Spray pattern 360°
Operating temperature

max. 90 °C (194 °F)

Ambient temperature 140 °C max.
(284°F), 30 min
Insertion opening BSP / NPT min. Ø 38 mm (1.5 inch) min. /Pin Fix Ø 57 mm (2.24 inch) BSP/NPT min. Ø 60 mm (2.36 inch) / 
Pin Fix min. Ø 90 mm (3.54 inch)  
CS Version BSP/NPT min. 45 mm 
(1.77 inch) / PinFix min. Ø 90 mm (3.54 inch)
BSP / NPT min. Ø 90 mm (3.54 inch) 
Pin Fix min. Ø 110 mm (4.33 inch)
Materials Stainless Steel 316L(1.4404), PTFE or C-PTFE
Pipe connection ⅜" BSP or NPT female
optional Pin Fix for½" OD (12.7 x 1.6) &DN 15 (19 x 1.5) tube
¾" BSP or NPT female, 
optional Pin Fix for 1" OD (25.4 x 1.6) & 
DN 25 (29 x 1.5) tube
1¼" BSP or NPT female, 
optional Pin Fix for 1½" OD (38.1x1.6 mm) & 
DN 40 (41 x 1.5 mm) tube
Weight approx. 0.11 kg (0.24 lbs) approx. 0.35 kg (0.77 lbs) approx. 0.9 kg (1.98 lbs)

Contact

Breconcherry

Old Wolverton Road
Milton Keynes
Buckinghamshire
MK12 5PY

Tel. +44 1531 632476
Fax +44 1531 633839

This email address is being protected from spambots. You need JavaScript enabled to view it.

Contact

This site uses Cookies >